Panasonic DMCZS6 DMCZS5 User Guide - Page 73
Motion picture recording format [REC MODE], Recording motion pictures
View all Panasonic DMCZS6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
■Motion picture recording format ([REC MODE]) The camera can be changed between motion picture recording formats ([REC MODE]) when recording. [REC MODE] Mode can be set from the motion picture recording menu. (→108) Motion picture recording format ([REC MODE]) Features [AVCHD Lite(GPS REC)]∗1 [AVCHD Lite]∗1 • Can record high-definition motion pictures. • Can record high-definition motion pictures longer than [MOTION JPEG] on cards of the same size. • Pictures can be played back by inserting the card in an AVCHD- compatible device.∗2 [MOTION JPEG] • You can record high-definition motion pictures or small QVGA size motion pictures, etc, by changing picture quality settings. • Recorded motion pictures can be played back with 'QuickTime' on a PC, etc. • Continuous recording time is available until the motion picture data volume reached 2 GB. To continue recording, press the motion picture button and begin recording again. ∗1 When the term "AVCHD Lite motion picture" is used in this manual, it means a motion picture recorded in [AVCHD Lite(GPS REC)] or [AVCHD Lite]. ∗2 Correct playback may not be possible with some compatible devices. Also, motion pictures recorded in [AVCHD Lite(GPS REC)] cannot be played back with Panasonic digital cameras (LUMIX) compatible with AVCHD (Lite) recording that were sold in or before 2009. • When [GPS SETTING] is [ON] or , the location name information from the start of recording is recorded on motion pictures that are recorded in [AVCHD Lite(GPS REC)] or [MOTION JPEG]. (When positioning succeeds and location name information is acquired) ■Recording motion pictures in The camera automatically detects the scene to record motion pictures with optimal settings. When scene does not correspond to any on the right. [i PORTRAIT] [i SCENERY] [i LOW LIGHT] [i MACRO] • If brightness or other conditions change during recording, the Scene Mode will be changed automatically. • In mode, focus and exposure will be set according to the face detected. • will be selected for nightscapes and other dark scenes. Flash cannot be used with this mode. • If conditions do not allow scenes to be detected easily (→35). • If the camera does not select your desired Scene Mode, choosing an appropriate mode manually is recommended. • The following menu options in the [MOTION PICTURE] menu can be set: • [REC MODE] • [REC QUALITY] • The following functions are fixed: • [DIGITAL ZOOM]: [OFF] • [WIND CUT]: [OFF] • [WHITE BALANCE]: [AWB] • [AF MODE]: (Face Detection)∗ • [CONTINUOUS AF]: [ON] ∗ 1-area-focusing turns on when faces cannot be detected. • [I.EXPOSURE] is activated automatically based on the conditions. 73 VQT2R20