Panasonic DMCZS6 DMCZS5 User Guide - Page 24

Using the [SETUP] menu (Continued) For details about the setting procedure in the [SETUP] menu (→20) Item [REC AREA] Enables verification of the recordable area for a motion picture before recording. [ECONOMY] Turn off the power or make the LCD monitor go dark while not using the camera to minimize battery consumption. Settings, notes [OFF]/[ON] • Recordable area displayed for motion pictures should be interpreted as a Guideline. • When using Extended Optical Zoom, the recordable area may not always be displayed for certain zoom ratios. • This setting cannot be used with Intelligent Auto Mode. This section is not recorded. [SLEEP MODE] [OFF]/[2 MIN.]/[5 MIN.]/[10 MIN.]: Automatically shut off power while not in use. • To restore → Press the shutter button halfway, or turn on the power again. • Cannot be used in the following cases: When using AC adaptor (optional) and DC coupler (optional), when connected to computer/printer, during motion picture recording/playback, during Slide Shows, during automatic demo playback • Settings fixed to [5 MIN.] in [INTELLIGENT AUTO] Mode or [CLIPBOARD] Mode, or [10 MIN.] while Slide Show is paused. [LCD POWER SAVE] [OFF]/[ON]: The LCD monitor goes dark to minimize power consumption. • Reduces the picture quality of the LCD monitor display during recording to minimize battery consumption (except for the Digital Zoom area). Note, however, that there is no effect on the recorded picture. • When [LCD MODE] is set, the brightness of the LCD monitor follows the setting in [LCD MODE], but the picture quality of the LCD monitor stays at a low level. 24 VQT2R20 [REC AREA] is not available in the DMC-ZS6/DMC-ZS5.