Panasonic DMPMS10 DMPMS10 User Guide - Page 12

Connections & Settings ≥ Refer to the operating instructions of the hub or router. ≥ WPS (Wi-Fi Protected Setup) is a standard that facilitates settings relating to the connection and security of wireless LAN devices. To see whether your wireless router supports WPS, check the wireless router operating instructions. ≥ You can perform this setup anytime by selecting "Easy Network Setting" in the Setup menu. (> 25) ≥ You can redo these settings individually using "Network Settings". (> 25) ≥ Do not use this unit to connect to any wireless network for which you do not have usage rights. During automatic searches in a wireless network environment, wireless networks (SSID) for which you do not have usage rights may be displayed; however, using these networks may be regarded as illegal access. ≥ After performing network settings on this unit, the settings (encryption level, etc.) of the wireless router might change. When you have trouble getting online on your PC, perform the network settings on your PC in accordance with the settings of wireless router. ≥ Please be aware that connecting to a network without encryption may result in the content of the communication being illegitimately viewed by a third party, or the leaking of data such as personal or secret information. * SSID An SSID (Service Set IDentification) is a name used by wireless LAN to identify a particular network. Transmission is possible if the SSID matches for both devices. Reprogramming the remote control If you have more than one Panasonic player/ recorder and the remote control operates both products at once, you will need to change the remote control code to prevent this occurrence. (> 27, "Remote Control Code") Firmware updates Occasionally, Panasonic may release updated firmware for this unit that may add or improve the way a feature operates. These updates are available free of charge. This unit is capable of checking the firmware automatically when connected to the Internet via a broadband connection. When a new firmware version is available, the following message is displayed. New firmware is available. Please update firmware in Setup. To update the firmware Press [HOME] > press the [SETTINGS] button on the remote control > select "System" and press [OK] > select "Firmware Update" and press [OK] > select "Update Now" and press [OK] DO NOT DISCONNECT the unit from the AC power or perform any operation while the update takes place. After the firmware is installed, INFO LED and POWER LED flash for 3 times (> 6), and "FIN" will be displayed on the screen. Unit will restart and the following screen will be displayed. The firmware was updated. Current Version: x.xx RETURN ≥ To show the firmware version on this unit. (> 27, "Firmware Version Information") ≥ Downloading will require several minutes. It may take longer or may not work properly depending on the connection environment. ≥ If you do not want to check for the latest firmware version, set "Automatic Update Check" to "Off". (> 27) - 12 -