Panasonic DMPMS10 DMPMS10 User Guide - Page 25

Settings Audio ∫ Dynamic Range Compression You can listen at low volumes but still hear dialog clearly. (Dolby® Digital and Dolby® Digital Plus only) ∫ Digital Audio Output Press [OK] to show the following settings: ¾Dolby D/Dolby D + ¾ DTS Select the audio signal to output. ≥ Select "PCM", when the connected equipment cannot decode the respective audio format. This unit decodes the audio format and transmits to the connected equipment. ≥ Not making the proper settings may result in noise. ∫ Downmix Select the downmix system of multi-channel to 2-channel sound. ≥ Select "Surround encoded", when the connected equipment supports the virtual surround function. ≥ The downmix effect is not available when "Digital Audio Output" is set to "Bitstream". [MST60] 3D ∫ 3D Playback Precautions Set to display or hide the 3D viewing warning screen when playing back 3D images. Network ∫ Easy Network Setting (> 10) ∫ Network Settings Perform network-related settings individually. Press [OK] to show the following settings: ¾ LAN Connection Mode Select the LAN connection method. ≥ Select "Wireless Master" when you make a direct wireless connection between this unit and a Home Network device. Internet connection is not available when this item is selected. ¾ Wireless Settings This allows the wireless router and connection settings to be set. Current connection settings and connection state can be checked. Connection Setting The wireless router connection wizard will be displayed. Double Speed Mode Setting (2.4GHz) Set the connection speed for a 2.4 GHz wireless format. ≥ If you connect using the "Double Speed Mode (40MHz)", 2 channels use the same frequency band, and there is consequently a greater risk of reception interference. This can cause the connection speed to drop or become unstable. ∫ Pop-Out Level (> 23) Language ∫ Subtitle Text Select a suitable item according to the language used for MKV subtitles text. ≥ This item is displayed only after playing back a file. ∫ On-screen Language Choose the language for menus and on-screen messages. ¾ IP Address/DNS Settings This is for checking the state of the network connection and setting the IP address and DNS-related. Press [OK] to show the respective setting. ¾ Proxy Server Settings This is for checking the state of connection with the Proxy server and performing settings. Press [OK] to show the respective setting. - 25 -