Panasonic HCX800 HCX800 User Guide - Page 155

Problem If the SD card is inserted in this unit, it is not recognized. HC-X900M The remote control does not function. Others Check points ≥ If the SD card is formatted on a PC, it may not be recognized by this unit. Use this unit to format SD cards. (l 50) ≥ [REMOTE CONTROL] of the [SETUP] is [OFF]. (l 52) ≥ The button-type battery of the remote control may be run out. Replace it with a new button-type battery. (l 52) ∫ If AVCHD scenes do not change smoothly when played back on another device The images may be still for several seconds at the joins between the scenes if the following operations are performed when multiple scenes have been continuously played back using another unit. ≥ Just how smoothly the scenes will be played back depends on the playback unit. Depending on the unit used, the images may stop moving and become still for a moment even when none of the following conditions are applicable. ≥ A continuous recording of motion picture data that exceeds 4 GB may momentarily stop at every 4 GB of data when played back with another device. ≥ It may not play back smoothly when the editing of scenes was done with the HD Writer AE 4.1, but it will play back smoothly if you set the seamless settings in the HD Writer AE 4.1. Refer to the operating instructions for the HD Writer AE 4.1. Principal reasons for not playing back smoothly ≥ When the scenes were recorded on different dates ≥ When scenes lasting under 3 seconds have been recorded ≥ When PRE-REC was used for recording ≥ When the Interval Recording is used ≥ When deleting scenes ≥ When selected scenes are copied to a disc in a connected DVD burner ≥ When scenes recorded more than 99 scenes on the same date ≥ HC-X900M When selected scenes are copied between an SD card and the built-in memory 155 VQT4C76