Panasonic HCX800 HCX800 User Guide - Page 68

[REC MODE] Switch the picture quality and recording format of the motion pictures to be recorded. MENU : [RECORD SETUP] # [REC MODE] # desired setting ≥ It is possible to set from the quick menu. (l 42) [HA]/[HG]/[HX]/[HE]*1: [1080/60p]*2: [iFrame]*3: [AVCHD 3D]*4: [SbS 3D]*4: Set the recording mode to 1080/60i. Set the recording mode to 1080/60p. Set the recording mode to iFrame. Set the recording format to AVCHD 3D format, which can record in 3D full high-definition image. Set the recording format to side-by-side format (2 screen structure), which can record in 3D image. *1 Recording will have higher quality in the order of [HA], [HG], [HX] and [HE]. *2 It can record with highest quality image in this unit. *3 [iFrame] is a format suitable for Mac (iMovie'11). It is recommended for when using a Mac. *4 This is displayed only when the 3D Conversion Lens (optional) is attached. ≥ Recordable time using the battery (l 22) ≥ This function's default setting is [HG] mode. ≥ Please refer to page 163 about approximate recordable time. ≥ When the unit is moved a lot or moved quickly, or when a fast-moving subject is recorded (particularly when recording in [HE] mode), mosaic-type noise may appear at playback. [TIME LAPSE REC] A scene that moves slowly for long period of time is recorded frame by frame with an interval, and is recorded as a short time motion picture. A frame is recorded with a set recording interval. 30 frames will make up motion picture of 1 second. ≥ Set [ZOOM MODE] to [Opt.Zoom 12k]. (l 67) ≥ Set [REC MODE] to [HA], [HG], [HX] or [HE]. MENU : [RECORD SETUP] # [TIME LAPSE REC] # desired setting [OFF]: Cancel the setting. [1 SECOND]/[10 SECONDS]/[30 SECONDS]/[1 MINUTE]/[2 MINUTES]: Change the recording interval. ≥ Switch to Manual Mode when the Interval Recording is set. ≥ appears on the screen. ≥ After recording, the setting of Interval Recording is canceled. ≥ Audio cannot be recorded. 68 VQT4C76