Panasonic HCX800 HCX800 User Guide - Page 46
Set [QUICK START] to [ON]., Close the LCD monitor and retract the viewfinder., Change the mode
![]() |
View all Panasonic HCX800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
≥ Change the mode to or . 1 Set [QUICK START] to [ON]. 2 Close the LCD monitor and retract the viewfinder. HC-X900M HC-X800 The status indicator A flashes green and the unit goes into Quick Start Standby Mode. ≥ The lens cover does not close. 3 Open the LCD monitor or extend the viewfinder. HC-X900M HC-X800 The status indicator A lights red and the unit is put into recording pause. ≥ Quick Start Standby Mode is canceled if j about 5 minutes elapsed j mode is set to ≥ Depending on the recording conditions and menu settings, time for Quick Start may be longer than 0.6 seconds. ≥ It may take some time for Automatic White Balance to adjust. ≥ In the Quick Start Mode, the zoom magnification becomes approx. 1k. ≥ HC-X900M If [ECONOMY (BATT)] (l 45)/[ECONOMY (AC)] (l 45) is set to [ON] and the unit automatically goes into Quick Start Standby Mode, close the LCD monitor and viewfinder and then open the LCD monitor or extend the viewfinder again. HC-X800 If [ECONOMY (BATT)] (l 45)/[ECONOMY (AC)] (l 45) is set to [ON] and the unit automatically goes into Quick Start Standby Mode, close the LCD monitor and then open it again. ≥ Turn the unit off using the power button. ≥ HC-X900M Quick Start Standby Mode cannot be released by the remote control. 46 VQT4C76
![](/manual_guide/products/panasonic-hcx800-hcx800-user-guide-f6b4603/46.png)