Panasonic KX-TGE445B Operating Manual - Page 35
Baby monitor, Setting the baby monitor
View all Panasonic KX-TGE445B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
2 MbN: Select the desired setting. a MSAVEN R If you select "Off", press MOFFN to exit. 3 Enter the desired hour and minute you wish to start this feature. 4 *: Select "AM" or "PM". a MOKN 5 Enter the desired hour and minute you wish to end this feature. 6 *: Select "AM" or "PM". 7 MSAVEN a MOFFN *1 KX-TGE440 series: page 3 Changing the start and end time 1 For handset setting: MMENUN#237 For base unit setting (using a handset)*1: MMENUN#*237 2 Continue from step 3, "Turning silent mode on/off", page 34. *1 KX-TGE440 series: page 3 Selecting groups to bypass silent mode 1 For handset setting: MMENUN#241 For base unit setting (using a handset)*1: MMENUN#*241 2 MbN: Select the desired groups. a MSELECTN R " " is displayed next to the selected group numbers. R To cancel the selected group: MbN: Select the group. a Press MSELECTN again. " " disappears. 3 MSAVEN a MOFFN *1 KX-TGE440 series: page 3 Baby monitor This feature allows you to listen in on a room where another handset is located, allowing you to easily monitor from different areas of the house or even while away from home. The monitored handset (placed in a baby's room, for example) will automatically call the Programming monitoring handset, base unit, or the phone number stored when it detects sound. Important: R Before using this feature, we recommend that you test this feature and adjust the baby monitor sensitivity as needed, especially if you plan to monitor from outside. R This feature should not be used as a substitute for a medical or caregiver's supervision. It is the caregiver's responsibility to stay close enough to handle any eventuality. Note: R If the unit is connected to a PBX system, you cannot set the baby monitor. R During the monitoring mode, battery consumption is faster than usual. We recommend leaving the monitored handset on the base unit or charger. R The monitored handset never rings while it is being monitored. If the base unit is placed near the monitored handset, we recommend turning off the base unit ringer volume (page 17). Setting the baby monitor Perform the setting operation with the handset to be monitored (for example, the handset placed in a baby's room). To monitor with a unit The internal baby monitor feature is available: - between handsets - between a handset and the base unit*1 *1 KX-TGE440 series: page 3 1 MMENUN#268 2 MbN: "On" a MSELECTN 3 MbN: Select the desired unit's number to monitor with. a MSAVEN R "Baby monitor" will be displayed. R The registered unit's name/number is displayed. For assistance, please visit http://shop.panasonic.com/support 35 TGE43xUS(en)_1112_ver021.pdf 35 2015/11/12 10:12:57