Panasonic KX-TGF382M KX-TGF38x Owner's Manual - Page 16
Link to Cell, Link to cell feature, Pairing a cellular phone - link2cell bluetooth
View all Panasonic KX-TGF382M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Link to Cell Link to cell feature You can connect your base unit and cellular phone using Bluetooth wireless technology, so that you can make or answer cellular calls using your phone system. This allows you to: - use the unit to talk on cellular calls even if some areas of your home have poor cellular reception, simply by placing your cellular phone in an area with good reception. - talk on cellular calls even if your cellular phone is in your pocket or bag. - enjoy cordless cellular calls even if your cellular phone plugged in and charging. Important: R Your cellular phone must support the Hands Free Profile (HFP) specification. R You may pair 2 cellular phones and 1 headset. R The unit can be used to talk on 2 lines at the same time (for example, 2 cellular lines, or the landline and 1 cellular line). R Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). R Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit. 2 Your cellular phone: While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode. R Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: "0000"). If your cellular phone shows PassKey confirmation on its display, follow the directions to proceed. 3 Base unit: Wait until a long beep sounds. R It may take more than 10 seconds to complete pairing. R When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit. You are ready to make cellular calls. 4 MEXITN Note: R Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phone's operating instructions. R Make sure you cancel your cellular phone's current pairing if you want to pair it to the other line (page 16). R The default setting for the alert feature is "On", so when you pair your cellular phone to the base unit, this feature may be activated (page 54). (This depends on the version and type of cellular phone you are using.) Pairing a cellular phone Important: R For more details and the list of compatible cellular phones, please visit our Web site: www.panasonic.com/link2cell R Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone. 1 Base unit: Press and hold MCELL 1N or MCELL 2N for a few seconds. R After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes. Unpairing a cellular phone You can cancel the pairing of a cellular phone that is stored in the base unit. You can configure this setting using either the base unit or one of the handsets. Handset / Base unit 1 For CELL 1: MMENUN#6111 For CELL 2: MMENUN#6112 2 MbN: "Yes" a MSELECTN R When the cellular phone is unpaired, the CELL indicator is turned off. 3 Proceed with the operation for your unit. Handset: MOFFN Base unit: MEXITN 16 For assistance, please visit www.panasonic.com/support TGF38x(en)_1205_ver101.pdf 16 2014/12/05 10:20:12