Panasonic KX-TGF382M KX-TGF38x Owner's Manual - Page 47
Other programming, Answering the baby monitor, Changing the handset name
View all Panasonic KX-TGF382M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Programming Handset 1 Press MMENUN on the handset being monitored. 2 MbN: "On/Off" a MSELECTN 3 MbN: "Off" a MSELECTN a MOFFN Editing an outside monitoring number Handset 1 Press MMENUN on the handset being monitored. 2 MbN: "On/Off" a MSELECTN 3 MbN: "On" a MSELECTN 4 MbN: Select the outside line. a MEDITN 5 MMENUN a MbN: "Edit" a MSELECTN 6 Edit the name if necessary. a MOKN 7 Edit the phone number if necessary. a MOKN a MSELECTN Erasing an outside monitoring number Handset 1 Press MMENUN on the handset being monitored. 2 MbN: "On/Off" a MSELECTN 3 MbN: "On" a MSELECTN 4 MbN: Select the outside line. a MEDITN 5 MMENUN a MbN: "Erase" a MSELECTN 6 MbN: "Yes" a MSELECTN a MOFFN Answering the baby monitor Handset / Base unit n When monitoring with a unit: Handset: Press M N to answer a call. Base unit: Press M N to answer a call. If you want to respond from the monitoring unit, press MMUTEN. R The monitoring unit will answer calls automatically when the auto intercom feature is set to "On" (page 27). Note: R If you receive an outside call when communicating with the monitored handset, the interrupt tone sounds. - To answer the call with the handset, press MOFFN, then press M N. - To answer the call with the base unit, press M N 3 times.*1 *1 If MMUTEN is pressed, press MZN 2 times. n When monitoring from an outside line: Answer the call. If you want to respond from your monitoring phone, press #1 using tone dialing. You can turn off the baby monitor feature by pressing #0. Note: R The unit disconnects the call automatically after 2 minutes. Baby monitor sensitivity You can adjust the sensitivity of the baby monitor. Increase or decrease the sensitivity to adjust the sound level needed to trigger the baby monitor feature. R This feature cannot be set during a monitoring call. Handset 1 Press MMENUN on the handset being monitored. 2 MbN: "Sensitivity level" a MSELECTN 3 MbN: Select the desired setting. a MSAVEN a MOFFN Other programming Changing the handset name The default handset name is "Handset 1" to "Handset 6". You can customize the name of each handset ("Bob", "Kitchen", etc.). This is useful when you make intercom calls between handsets. To display the handset name in standby mode, turn on the handset name display feature (page 48). Handset 1 MMENUN#104 2 Enter the desired name (max. 10 characters). 3 MSAVEN a MOFFN For assistance, please visit www.panasonic.com/support 47 TGF38x(en)_1205_ver101.pdf 47 2014/12/05 10:20:14