Panasonic KX-TGM470 Operating Instructions - Page 30
To use a neckloop, Setting the headset type, Headset, Neckloop with Mic
![]() |
View all Panasonic KX-TGM470 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Accessibility To use a neckloop When using a neckloop with the handset, you can speak using the neckloop's microphone or using the handset's microphone. Important: R You must set the headset type before use (page 30). 1 Connect the neckloop to the headset jack on the side of the handset. 2 Use the handset as normal. R Refer to your neckloop's operating instructions for details. R If your neckloop does not have a microphone, speak into the handset's microphone. R You can use volume booster (page 24), speech booster (page 26), tone control (page 23), and other features even when using a neckloop. Setting the headset type Set this setting to match the type of device connected. This feature can be set for each unit. "Headset" (default): Disables the handset's microphone. The connected headset is used for talking and listening. "Neckloop with Mic": Disables the handset's microphone. The connected neckloop is used for talking and listening. "Neckloop w/o Mic": Enables the handset's microphone. The connected neckloop is used for listening only. 1 MMENUN#786 2 MbN: Select the desired setting. a MSAVEN a MOFFN 30 For assistance, visit www.panasonic.ca/english/support TGM470_490C(en)_0805_ver403.pdf 30 2021/08/05 10:23:28
![](/manual_guide/products/panasonic-kxtgm470-operating-instructions-3315b6d/30.png)