Panasonic KX-TGM470 Operating Instructions - Page 71

Charge only mode, To activate the charge only mode, ANSWER ON/OFF, ERASE, For assistance

Page 71 highlights

Charge only mode The charge only mode is the dedicated mode to charge the backup batteries of the base unit. Do not use this mode if it is unnecessary because all functions except the base unit's battery charge is disabled with this feature on. Leave all the registered handsets on the chargers during use of the charge only mode. n To activate the charge only mode: 1 Press MANSWER ON/OFFN to turn on the answering system. R Make sure the message counter turns on. 2 Disconnect the telephone line cord, the AC adaptor plug, and remove the batteries from the base unit. 3 Press and hold M N, MZN, and MERASEN at the same time, then insert the AC adaptor plug to the base unit. Keep on pressing these keys until a beep tone sounds. 4 Release these keys. R The message counter turns off. 5 Insert batteries. R The batteries are started to be charged. Note: R If the message counter is still on when you release the keys, the base unit is not in the charging only mode. Repeat from step 1. n To deactivate the charge only mode: - Press any key. - 24 hours passed after activating the charge only mode. Useful Information For assistance, visit www.panasonic.ca/english/support 71 TGM470_490C(en)_0805_ver403.pdf 71 2021/08/05 10:23:32

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76

Charge only mode
The charge only mode is the dedicated mode
to charge the backup batteries of the base
unit. Do not use this mode if it is unnecessary
because all functions except the base unit’s
battery charge is disabled with this feature on.
Leave all the registered handsets on the
chargers during use of the charge only mode.
n
To activate the charge only mode:
1
Press
M
ANSWER ON/OFF
N
to turn on
the answering system.
R
Make sure the message counter
turns on.
2
Disconnect the telephone line cord, the
AC adaptor plug, and remove the
batteries from the base unit.
3
Press and hold
M
N
,
M
Z
N
, and
M
ERASE
N
at the same time, then insert
the AC adaptor plug to the base unit.
Keep on pressing these keys until a
beep tone sounds.
4
Release these keys.
R
The message counter turns off.
5
Insert batteries.
R
The batteries are started to be
charged.
Note:
R
If the message counter is still on when you
release the keys, the base unit is not in the
charging only mode. Repeat from step 1.
n
To deactivate the charge only mode:
Press any key.
24 hours passed after activating the
charge only mode.
For assistance, visit www.panasonic.ca/english/support
71
Useful Information
TGM470_490C(en)_0805_ver403.pdf
71
2021/08/05
10:23:32