Panasonic PV-GS50S Operating Instructions - Page 12
Quick Guide, To View the Playback Picture
View all Panasonic PV-GS50S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Quick Guide 1 1 Charge the Battery. (l 18) ≥Connect the AC Cable to the AC Adaptor and plug it into the AC Wall Outlet. ≥Attach the Battery to the AC Adaptor. (This will start the charging process.) ≥The [POWER] Lamp and [CHARGE] Lamp light up, and 2 charging starts. When the [CHARGE] Lamp goes off, charging is completed. ≥Since the Battery will not be charged when the DC Cable is connected to the AC Adaptor, disconnect it. 2 Attach the Charged Battery to the Palmcorder. (l 18) 3 Insert the Cassette. (l 20) 3 ≥Slide the [OPEN/EJECT] 1 Lever toward the front and pull OPEN / EJECT 1 down to open the Cassette Compartment. ≥Insert the Cassette. ≥Press [PUSH CLOSE] 2 to load the Cassette. ≥Close the outside compartment Cover. 2 PUSH CLOSE 4 4 OF 3 F ON MODE CAMERA VCR CARD PB 5, 6 6 SEARCH 8 7 FADE BACK LIGHT 9 F ON MODE 5 CAMERA VCR CARD PB OF 4 Start recording. (l 28) ≥Turn the Palmcorder on. (l 20) ≥Rotate the Switch 3 to [ON]. (The [CAMERA] Lamp lights up.) ≥Press the 4 Button. (Recording starts.) ≥Press the 4 Button again to pause the recording. To View the Playback Picture 5 Switch to the VCR Mode, rewind the tape, and play the tape back. (l 42) ≥Set the 5 Switch to VCR mode. (The [VCR] Lamp lights up.) ≥Press the 6 Button. (Rewind the tape.) ≥Press the 7 Button. (Playback starts.) ≥Press the 8 Button. (Playback stops.) 6 Turn the Palmcorder off. (l 20) ≥Set the 9 Switch to [OFF]. 12