Panasonic PV-GS50S Operating Instructions - Page 90

≥The following functions are disabled. ≥MPEG4 data or Voice data will not be output from ≥Self-timer (l 30) ≥Zoom Microphone Function (l 31) ≥Digital Zoom (l 31) ≥Fade In/Out Function (l 32) ≥Digital Effect Functions (l 39) ≥Title In/Creation (l 61) DV Terminal. ≥MPEG4 data cannot perform Cue/Review Playback, Slow Motion Playback (forward direction and reverse direction), Still Advance Playback (forward direction and reverse direction) or Jog Playback. ≥Even if the [CINEMA] is set to [ON], the black bars ≥During automatic copying of tape pictures onto a cannot be recorded on top and bottom of the card, the remaining number of pictures that can picture. still be recorded on the Card is displayed. When it ≥The sound is recorded in monaural, that is, mixed becomes [0], the tape is set to the Recording [L] and [R] of the stereo sound. Pause Mode. ª Recording to a Card from other ≥For the MPEG4 moving pictures recorded on a equipment (l 54) If you set the [TAPE/CARD/CARD MODE] Selector to [CARD], you can use the Card PhotoShot camera other than this camera, "k" may be displayed when they are played back. If the [1] Button is pressed in this case, "!" will be Function for externally input signals. (Not during displayed for a few seconds and the next image recording.) ≥Black streaks may appear at the four edges of the will be displayed. ≥For the still images recorded on the camera other image. this camera, the mega-pixel image size may be ≥When the [PHOTO SHOT] Button is pressed, the image may seem to move backward momentarily, displayed. ≥If an MPEG4 motion picture is played continuously but this does not affect the recording. for a long time, the playback may stop in the ≥If the [VOICE] Indication is displayed, recording to midway and the video camera may freeze while a a Card is not possible. still picture is being displayed. If this happens, ≥While recording with analog input, a Card PhotoShot Function cannot be used. press the [RESET] button. ≥When performing Cue or Review Playback of ª Card Playback (l 56) ≥If a blank (nothing recorded) Card is played, the voice data, the Playback elapsed time may not correspond to the actual recording time of the sound. screen becomes white and the [NO PICTURE], ≥When playing back an MPEG4 or voice data [NO MPEG4 DATA] or [NO VOICE DATA] recorded by other equipment, a part of the Indication appears depending on the mode playback elapsed time may be indicated as [--]. selected. ≥If you attempt to play back if file recorded in a different format or if file data is defective, the [k] ª Voice Power Save (l 24) ≥Voice Power Save Function automatically shuts off Indication and the [CARD ERROR] Indication the monitor to reduce the power consumption could appear as a warning. when no operation is being performed in the Voice ≥When the pictures recorded by another Recording Mode. When [VOICE POWER SAVE] Palmcorder are played back with this Palmcorder, on the [OTHER FUNCTIONS1] Menu is set to the size of the pictures may be different from the [ON], the power save function is activated, and the recorded size. screen turns off in a few seconds after operations, ≥This Palmcorder can also play back the Mega-Pixel still pictures up to 2560k1920 size such as play or recording, are performed. ≥The Voice Power Saving Function is cancelled recorded with the other equipment. However it when any operation is performed. takes longer than usual time, and the picture may ≥Do not forget to turn off the power. not be playable. ≥When playing back a nonstandardized file, the Folder-File Number may not be displayed. ≥When playing back the MPEG4 moving picture with fast moving subject or zooming operation, the image seem to stop momentarily, or a mosaic like pattern may appear. This is not a malfunction. 90