Panasonic PV-GS50S Operating Instructions - Page 88

ª Listening to Playback Sound ª Playback Digital Effect Functions Through Headphones (l 47) If you want to listen to the playback sound of a tape ≥Revised signals of images to which digital effects through headphones, set [AV JACK] on the [AV IN/ are added during playback cannot be output from OUT SETUP] Sub-Menu to [OUT/PHONES] and the DV Terminal or Digital Still Picture Terminal. connect the headphones to the [PHONES] Jack on ≥You cannot use the Wipe Function or Mix Function this Palmcorder. In this case, no sound (including while playing back the non-recorded portion of warning sounds and shutter sounds) will be tape. reproduced through the built-in speaker of the Multi-Picture Mode (VCR Mode) (l 48) Palmcorder. When the A/V Cable is inserted into the ≥The quality of Multi images deteriorates slightly. AV Jack, the internal speaker works. ª Selecting the Sound during ≥Playback multi-mode screens cannot be output through DV Terminal or Digital Still Picture Playback (l 42, 49) Terminal. You can select the sound by using the [AUDIO OUT] ≥If there is input from the DV Terminal, a multi on the [PLAYBACK FUNCTIONS] Sub-Menu. screen cannot be created. STEREO: Stereo Sound (main sound and ≥When signals are input from S-Video Input/Output subsound) Jack or Audio-Video Input/Output Jack, a multi L: Left channel sound (main sound) screen cannot be re-displayed. R: Right channel sound (sub sound) ≥Signals input from S-Video Input/Output Jack or ≥If you dub a tape recorded at the [12bit] selected Audio-Video Input/Output Jack cannot be as the [AUDIO REC] setting, playback sound displayed on a multi screen. becomes stereo sound regardless of whether ≥If you switch the Palmcorder from the Index [12bit AUDIO] is set to [MIX] or to [AUDIO OUT]. Multi-Picture Mode over to the Camera Mode, the ª Playback Zoom Functions (l 45) setting of [SCAN MODE] on the ≥You cannot adjust volume with the Remote Controller in Playback Zoom Mode. ≥If you turn off the Palmcorder, or if you switch from VCR Mode to Camera Mode, Playback Zoom [MULTI-PICTURES] Sub-Menu of the [CAMERA FUNCTIONS] Main-Menu is automatically set to [STROBE]. ª Audio Dubbing (l 50) Mode is automatically cancelled. ≥The blank section of a tape cannot be dubbed. ≥Even if Playback Zoom Functions are being used, ≥Sounds sent through the DV Terminal cannot be images that are output from the DV Terminal or dubbed. Digital Still Picture Terminal are not enlarged. ≥If a tape has a non-recorded portion when the tape ≥As you enlarge an image, the quality of image is dubbed, images and sounds may be disturbed suffers. when this portion of the tape is played back. ≥During the Playback Zoom Function, the Variable ≥If you set the tape counter back to 0 at the position Speed Search Function cannot be used with the where you want to stop Audio Dubbing so as to Remote Controller. make it possible to use the Memory Stop Function ª Index Search Functions (l 46) ≥Index Search may not be possible at the beginning of tape. ≥Because PhotoShot Index Signals are not recorded on still pictures recorded in Continuous PhotoShot Mode, the PhotoShot Index Search Function cannot be used for these still pictures. ≥Scene Index Search may not function properly if the interval between 2 scene index signals is shorter than 1 minute. ≥For the still pictures taken in the Continuous PhotoShot Mode or Digital Still Picture Mode, (l 96), Audio Dubbing is terminated automatically when the tape reaches this position. ≥In the case of importing data recorded with Audio Dubbing to a Computer using the Computer's software program, only the original sound (ST1) may be imported, depending on the software program. Microphone Jack When audio dubbing is carried out through an external microphone or audio equipment, connect it to the [MIC] Jack. In this case, the built-in microphone of the Palmcorder will be turned off. PhotoShot index signals are not recorded. 88