Panasonic PV-GS50S Operating Instructions - Page 83
Initializing the Modes, Warning/Alarm Indications
View all Panasonic PV-GS50S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Others ª Changing the Counter Display Mode Y TAPE NOT INSERTED: By changing [C.DISPLAY] on the No Cassette is inserted. (l 20) [DISPLAY SETUP] Sub-Menu, you can change the X LOW BATTERY MODE: Counter Display Mode to Tape Counter Indication The Battery is low. Recharge it. (0:00.00), Memory Counter Indication (M0:00.00), (l 18) and Time Code Indication (0h00m00s00f). 0: The internal lithium battery is low. ≥You can also press the [COUNTER] Button of the (l 27) Remote Controller repeatedly to change the 2 END/TAPE END: Counter Indication. The tape ended during recording. ª Displaying Date/Time Indication REMOTE/ To display Date/Time Indication, set the appropriate CHECK REMOTE MODE: Date/Time in [DATE/TIME] on the [DISPLAY SETUP] Sub-Menu. Wrong Remote Controller Mode has been selected. (l 17) ≥You can also press the [DATE/TIME] Button on CANNOT REC LP-MODE: the Remote Controller repeatedly to display or Because the original recording was change the Date/Time Indication. ª Changing the Display Mode done in LP Mode, audio dubbing cannot be performed. (l 50) INCOMPATIBLE DATA: By changing [DISPLAY] on the [DISPLAY SETUP] This Cassette is incompatible or Sub-Menu, Counter Display Mode changes to All contains copy-guard. Function Display, Partial Display, and Minimum Because the medium is protected Display. by a copy guard, images cannot be recorded correctly. Initializing the Modes °: If this Indication appears, return the You can change the Menu settings back to the shipping condition. 1 Set [CAMERA FUNCTIONS] >> [OTHER FUNCTIONS 2] >> [INITIAL SET] >> [YES]. ≥The initializing takes a while. ≥After the initializing is completed, the LCD Monitor to the original position in order to check the specific content of the Warning/Alarm Indication. AV INPUT RECORDING: When you are attempting to record on the Memory Card during dubbing (l 66) on the Cassette. [COMPLETED] Indication appears with beeps. NO CARD: There is no Memory Card inserted. ≥Initializing will not erase the clock setting that PLEASE WAIT: has been adjusted. When reading of the Memory Card Warning/Alarm Indications (playback, format, when using the Multi-Picture Function). (l 56, 65) CARD ERROR: If any one of the following indications lights up or The Memory Card is not compatible flashes, please check the condition of the with the Palmcorder. Palmcorder. CHECK SELECT SWITCH: EJECT TAPE: After the [DEW DETECTED] You are attempting to record a tape Indication appears, eject the in VCR Mode, with the combination Cassette. of modes set with the [TAPE/CARD/ Y CHECK REC TAB: The erasure prevention tab on the inserted Cassette is open (that is, set to [SAVE]). When you are attempting to do audio dubbing on the unrecorded (blank) portion of the tape, or you are attempting to do dubbing on the Cassette whose tab is set at [SAVE]. (l 50, 67) CARD MODE] Selector, this Indication appears. Pressing the Recording Start/Stop Button with [PICTURE] in Camera Mode. Pressing the PhotoShot Button with [MPEG4] or [VOICE] in Camera Mode. Pressing the Recording Start/Stop Button with [TAPE] and [PICTURE] in Card Playback Mode. Pressing the PhotoShot Button with [PICTURE] in Card Playback Mode. 83