Panasonic PV-GS50S Operating Instructions - Page 42
VCR Mode
![]() |
View all Panasonic PV-GS50S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
4 W.B / SHUTTER / IRIS PUSH MF / VOL / JOG 1 OF F ON MODE 1 CAMERA VCR CARD P.B 2 3 SEARCH BACK LIGHT 2 MAGIC PIX FADE 3 VCR Mode Playing Back The recorded scene can be played back immediately after recording. 1 Rotate the [OFF/ON/MODE] Switch and set the Palmcorder in the VCR Mode. ≥The [VCR] Lamp lights up. 1 2 Press the [6] Button to rewind the tape. ≥Rewind the tape to the point where you want to start playback. ≥When the tape reaches the beginning, rewinding stops automatically. 3 Press the [1] Button to start playback. To Stop Playback Press the [∫] Button 2. ≥If a cassette recorded with copyright protection signals is played back, the screen becomes blue or mosaic-like noise patterns appear. ª Adjusting the Sound Volume Until the [VOLUME] Indication 3 appears, keep pressing the [PUSH] Dial 4. Then, rotate the [PUSH] Dial to adjust the volume. After the adjustment, press the [PUSH] Dial to make the [VOLUME] Indication disappear. To adjust the volume with the Remote Controller, press the [T] or [W] Button to display the [VOLUME] Indication. Press the [T] Button to increase the volume or press the [W] Button to decrease the volume. The [VOLUME] Indication goes off 2 or 3 seconds after the adjustment is finished. ≥When the Playback Zoom Function is in use, the sound volume cannot be adjusted. ≥For other notes, see page 88. 42
![](/manual_guide/products/panasonic-pvgs50s-operating-instructions-d920582/42.png)