Panasonic SAPM91D SAPM91 User Guide - Page 15

Discs - Convenient functions Program play (up to 32 items) Programming from a single disc DVD-A DVD-V VCD CD WMA MP3 JPEG During stop 1 Press [PGM]. "PGM" appears. Example: DVD-V Program Playback Choose a title and chapte.r 2 Press the numbered No. Disc T/G C/ T 1 -- Play buttons to select the Clear items (WMA MP3 JPEG then Clear all press [ENTER]). • Repeat this step to program other items. to select and press ENTER PLAY to start • To select an item using the cursor buttons Press [ENTER] and [e, r] to select an item, then press [ENTER] again to confirm the number. 3 Press [DVD/CD q] to play. Programming from multiple discs VCD WMA MP3 JPEG During stop 1 Select ALL DISC ON (➡ page 13). 2 Follow the steps above. Select the discs in step 2. • To exit the program mode Press [PGM] so "PGM" goes out. Press [PGM] again to go back to the program. • To add or change the program Press [e, r] to select an available item, then repeat step 2. • To clear the whole program Select "Clear all" and press [ENTER]. • To clear an item Press [SHIFT]+[CANCEL], or select "Clear" and press [ENTER]. • To skip a page Press [SHIFT]+[ANGLE/PAGE]. Note • Clear the existing program before creating a new program. • Times are not displayed while programming. • Items the unit cannot find can be programmed but are canceled during play. This is also the case if you program discs other than Video CD and CD. • The program is cleared when you switch the unit to standby, select another source, or move the disc out of the play position. • DVD-A If you select bonus groups, you will have to enter a password. • For HighMAT discs, select "Play as Data Disc" (➡ Other Menu, page 19) to use program play. RQT7932 15