Panasonic TC-32A400 Owners Manual - Page 10
Wall mounting the TV optional
View all Panasonic TC-32A400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Setting Up the TV • 40" class Wall mounting the TV (optional) Please contact a professional installer to purchase the recommended UL qualified wall-hanging bracket. For additional details, please refer to the wall-hanging bracket installation manual. Rear of the TV (View from the side) a b Depth of screw 1 2 Removing the pedestal from the TV Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV. 1 Lay the TV on a foam mat or thick soft cloth on a table (32" class only). 2 Remove the assembly screws from the TV. 3 Pull out the pedestal from the TV. 4 Remove the assembly screws from the bracket. Screw for fixing the TV onto the wallhanging bracket (not supplied) ■ Holes for wall-hanging bracket installation Class a b 32" 7.9" (200 mm) 39" 40" 7.9" (200 mm) 7.9" (200 mm) 3.9" (100 mm) ■ Screw specification Class Type Depth of screw Minimum Maximum 32" M4 0.36" (9 mm) 0.55" (14 mm) 39" M6 0.44" (11 mm) 1.06" (27 mm) 40" M6 0.44" (11 mm) 0.59" (15 mm) Warning ●Always be sure to ask a qualified technician to carry out set-up. ●Do not mount the unit directly below ceiling lights (such as spotlights, floodlights or halogen lights) that typically give off high heat. Doing so may warp or damage plastic cabinet parts. ●Take care when fixing wall brackets to the wall. Always ensure that there are no electrical cables or pipes in the wall before hanging bracket. ●To prevent fall and injury, remove the TV from its fixed wall position when it is no longer in use. ●Incorrect wall-hanging bracket or incorrect fitting may cause equipment to fall, resulting in injury and product damage. ●Panasonic disclaims liability for any damage or injury arising from incorrect wall-hanging bracket, incorrect fitting or otherwise failure to follow the above instructions. 10 English