Panasonic U1 Panaboard - Page 10
Installing the Thermal Transfer Film
UPC - 092281895208
View all Panasonic U1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Installing the Thermal Transfer Film Installing the Thermal Transfer Film Install the thermal transfer film in the printer. 1 Set the power switch to on ( I ). • " " will flash on the Multi-Copy/Error Indicator when the thermal transfer film has run out. • The screen will move to home position and stop. 2) Insert the blue shaft into the front left hole. Blue shaft ON OFF 2 Push down the printer open lever and open the printer door. 3) Place the blue gear on the front right groove. Blue gear 4) Place the white shaft on both sides of the back grooves. Printer door 3 Install the thermal transfer film. 1) Set the thermal transfer film, with the blue gear in front, on the right. White shaft Blue gear 10
Installing the Thermal Transfer Film
10
Install the thermal transfer film in the printer.
1
Set the power switch to on (
I
).
•“
” will flash on the Multi-Copy/Error
Indicator when the thermal transfer film has
run out.
• The screen will move to home position and
stop.
2
Push down the printer open lever and open
the printer door.
3
Install the thermal transfer film.
1)
Set the thermal transfer film, with the blue
gear in front, on the right.
2)
Insert the blue shaft into the front left hole.
3)
Place the blue gear on the front right groove.
4)
Place the white shaft on both sides of the back
grooves.
Installing the Thermal
Transfer Film
ON
OFF
Printer door
Blue gear
Blue shaft
Blue gear
White shaft