Panasonic U1 Panaboard - Page 22
Panaboard Operation Panel, Contrast, Remaining Film, Indicator, Contrast Button, Scan Button
UPC - 092281895208
View all Panasonic U1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Computer Interfacing ■ Panaboard Operation Panel It is possible to perform the same operations as with the electronic board control panel (page 9) from the following Panaboard Operation buttons. Note • While the Panaboard Operation Panel is displayed, the Copy Key on the electronic board control panel is used for scanning images into the computer. Panel Name Description Contrast/ Remaining Film Indicator This lamp indicator notifies the user when the time to replace the thermal transfer film is approaching (estimated) and of the contrast used during scanning or copying. Indicator off: Normal scanning or copying contrast Indicator on: Darker than normal scanning or copying contrast Indicator flashing*: Almost time to replace the thermal transfer film (Note that only about 15 more sheets may be copied when this indicator starts flashing.) Replacement film (UG-6001) is separately available from the dealer where you purchased your unit. * The flashing indicator will go out after the power is turned off, or the printer has been opened and closed. (When copying is per- formed, this indicator will begin flashing again.) Contrast Button Each time this button is pressed, the unit will alternate between normal and dark contrast modes (Normal/Dark). Scan Button This button scans the screen. Multi-Copy/ Error Indicator Multi-Copy/Stop Button This indicator displays the number of copies to be made. The display changes each time the Multi-Copy/Stop Button is pressed. Example: 1 → 2 9 → → 1 Selecting " " allows you to copy 4 screens continuously.) When an error occurs, a flashing symbol will appear in this display to indicate the error status. (See page 27.) When making multiple copies or copying 4 screens continuously, press this button until the desired number of copies or " " is displayed on the Multi-Copy/Error Indicator. This button can also be pressed to stop copying while executing multiple copies or copying 4 screens continuously. • The display changes as shown below each time the screen is copied. After reaching 0, the display will reset to 1. Example for multiple copies: 5 → 4 → 3 → 2 → 1 → 0 → 1 (Number is counted down.) Example for copying 4 screens continuously 0 → 1 (Display changes.) * If scanning, the setting 1 to 9 for the number of copies or " " for copying 4 screens continuously is ignored. Advance Button Clicking this button advances the screen from right to left. Clicking this button twice advances two screens from right to left. Reverse Button Clicking this button advances the screen from left to right. Clicking this button twice advances two screens from left to right. 22