Panasonic U1 Panaboard - Page 41

Optional Wall-mounting Kit (KX-B063) ■ Wall-mounting procedure 1 Confirm that the wall is strong enough to support the weight of the electronic board. Caution The wall must be capable of supporting at least 1,275N [130 kgf (287 lbs.)] for UB-7325. 2 Tape the Wall-mounting template on the wall. • Do not use the template included in the wall-mounting kit (KX-B063), but rather the one included with the electronic board (UB-7325). • When taping the template on the wall, make sure it is level. 3 1) Drill holes in the wall for the wall-mounting fixtures (8 holes total). • Holes on the wall-mounting fixture are 7 mm (1/4") in diameter. 2) After removing the wall-mounting template, attach the wall-mounting fixtures with the appropriate wall-mounting hardware (two screws in each fixture). Wall-mounting template (See page 30.) (provided with UB-7325) 1 Wall-mounting fixture L 812.8 mm (2' 8") 50 mm 762 mm (2' 6") (1 31/32") Installation Manual Wall-mounting hardware* 1 Wall-mounting fixture L 2 Wall-mounting fixture R (2 73/40")mm Wall-mounting hardware* * This hardware must be locally procured, it is not included in the kit. • Refer to the section "Attaching the wall-mounting fixtures" (page 42) for drilling in the wall and attaching the mounting fixtures. • Refer to step 3 on page 32 for mounting the electronic board. 41