Panasonic U1 Panaboard - Page 33
Installation Manual, Connect the power cord., Wipe the screen film surface., Check operations.
UPC - 092281895208
View all Panasonic U1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
4 Connect the power cord. 1) Securely fit the supplied power cord into the AC inlet on the printer unit. Assembling the Electronic Board 6 Check operations. Refer to "Electronic Board Operations Check" on page 34. 2) Fit the power cord into the cable holder. Cable holder 5 Wipe the screen film surface. Soak a soft cloth with water, wring well, and wipe the screen film surface. Installation Manual Caution • Do not wipe the screen film surface with paint thinner, benzene, or cleaners that contain abrasives. Doing so may cause discoloration. • Do not wipe the screen film surface with a dry cloth. Doing so may create static electricity. 33
Assembling the Electronic Board
33
Installation Manual
4
Connect the power cord.
1)
Securely fit the supplied power cord into the
AC inlet on the printer unit.
2)
Fit the power cord into the cable holder.
5
Wipe the screen film surface.
Soak a soft cloth with water, wring well, and
wipe the screen film surface.
• Do not wipe the screen film surface with paint
thinner, benzene, or cleaners that contain abrasives.
Doing so may cause discoloration.
• Do not wipe the screen film surface with a dry cloth.
Doing so may create static electricity.
6
Check operations.
Refer to “Electronic Board Operations Check”
on page 34.
Cable holder
Caution