Panasonic U1 Panaboard - Page 18

Computer Interfacing ■ Installing the drivers Before you use the computer interfacing function for the first time, install the USB, printer and TWAIN driver to your computer by following procedures. Note • Do not yet connect a USB cable to the electronic board. 1 Power on your computer and start Windows*1. • Log on as an administrator for Windows 2000 or Windows XP. *1 Microsoft Windows operating system (hereafter Windows) 2 Insert the CD-ROM into the CD-ROM drive. The Setup window will appear automatically. • Depending on the operating system or the settings that you are using, the Setup window may not appear automatically. In such a case, execute "Menu.exe" in the CD-ROM from the Explorer. 3 When "Welcome" window appears, click [Next]. 4 Click [Panaboard Setup]. • To install the Panasonic-DMS software, click [Panasonic-DMS] (see page 19). • To install the Acrobat Reader, click [Install Adobe Acrobat Reader]. To read the operating instructions, the Acrobat Reader must be installed in your computer. 5 Click [Install Drivers]. 6 Read "Software License Agreement" carefully and click [Yes]. 7 When the following window appears, check that the electronic board is not connected to your computer and click [OK]. • If the USB cable is connected to the electronic board, remove it and click [OK]. • For Windows 98 or Windows Me, a floppy disk or CD-ROM for installing the operating system may be required. • If the screen prompts to restart Windows, restart Windows. 18