Panasonic U1 Panaboard - Page 32
Caution, Install the electronic board., Using the stand option, Using the wall-mounting kit option - support
UPC - 092281895208
View all Panasonic U1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Assembling the Electronic Board 3 Install the electronic board. Install the electronic board using the stand (option) or wall-mounting kit (option). ■ Using the stand (option) 1) Hang the electronic board on the optional stand. ■ Using the wall-mounting kit (option) 1) Hang the electronic board on the optional wallmounting fixtures. A B • The electronic board can be mounted 200 mm (7 7/8") higher than hang position A by hanging it with the wing bolts B. 2) Secure the stand fixture to the electronic board using the two wing-bolts [M5 x 12 mm (15/32")] provided with the stand (option). 2) Secure the wall-mounting fixture to the electronic board using the two wing-bolts [M5 x 12 mm (15/32")] provided with the wallmounting kit (option). Caution • When mounting the electronic board, avoid banging it. Such impact may break the internal light or cause other damage. • After mounting the electronic board, gradually apply weight to it to make sure that the wall is strong enough to support it. 32