Panasonic VDRM30PP VDRM30PP User Guide - Page 160
When the DVD Palmcorder is connected to PC
View all Panasonic VDRM30PP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
When the DVD Palmcorder is connected to PC: Symptom Cause and Correction No drive icon appears on The DVD Palmcorder is not turned on. PC. Check the power supply. Driver is not properly recognized. Turn PC off and on again. If the drive icon still does not appear, use "Refresh driver" in Device Manager to reinstall the driver. Turn PC off and then disconnect the USB cable. Turn PC on again, and then use the USB cable to connect the DVD Palmcorder to PC. Make sure the USB cable is completely plugged into this DVD Palmcorder. If a yellow "!" mark is attached to some device in Windows® Device Manager, uninstall the USB device driver, and then reinstall it, following the procedure on page 137. A fatal exception 0A error It is recommended that you install Windows® 2000 Service Pack 3 occurs while installing or later. USB driver in Windows® 2000 Professional. Error occurs in playback If error occurs with USB connection, the transfer rate is not sufficient. of DVD Palmcorder on It is recommended that you use a USB terminal conforming to PC. USB2.0 when connecting the DVD Palmcorder. Application is not normally run on PC. Turn the PC and DVD Palmcorder off, and try again. Error occurs during writing to DVD-R disc. The temperature of DVD Palmcorder is too high due to continuous operation. Disconnect the DVD Palmcorder from PC once, remove the disc from the DVD Palmcorder, and then turn it off. After a few moments, connect them again and write to a brand-new disc. Transfer of images stops. Connect the DVD Palmcorder to another USB terminal of PC. If your PC is a desktop type, it is recommended that you use USB terminal on the back of PC. If you are using USB2.0 extended card, it is also recommended that you install the newest version driver provided by each USB2.0 card maker. DVD-RAM/R/RW drive built into PC cannot be used after the provided software has been installed. This problem may be solved if the software related to DVD-RAM/R/ RW of your PC is upgraded, or if the UDF driver is uninstalled. However, with Windows® 98 Second Edition / Me / 2000 Professional, uninstalling the UDF driver will make it impossible for the JPEG stills recorded on DVD-RAM of this DVD Palmcorder to be read by the PC. DVD-R disc cannot be played back on DVDMovieAlbumSE. DVD-MovieAlbumSE does not support playback or data read on DVD-R disc: Use generally available DVD video playback software to play back DVD-R disc on PC. Error appears when starting DVDMovieAlbumSE. Make sure that your PC display adapter (video card) conforms to DirectX8.1. Video written to hard disk DVD-MovieAlbumSE cannot edit DVD-VR data stored on hard disk of PC cannot be edited of PC: Copy the data to another DVD-RAM disc and then edit it. on DVD-MovieAlbum copy tool. Reference page 47 142 160