Panasonic VDRM30PP VDRM30PP User Guide - Page 69
PLAYING BACK, Immediately Checking Recorded Scene
View all Panasonic VDRM30PP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Playing Back Immediately Checking Recorded Scene You can check your recording immediately on the spot. 1 Press Tilt up/down and to left/ right to select, and then press to designate. button in the recording pause status. The DVD Palmcorder will enter the playback mode, and the scene you have recorded last will be played back. When playback is finished, the DVD Palmcorder will enter the pause status at the last image on disc. If the playback pause status continues for as long as 5 minutes, the DVD Palmcorder will automatically return to the recording pause status. 2 Press the button. Playback will stop, and recording pause status will be restored. Note: • If the LCD monitor is open during playback of movie, playback sound will be heard from the speaker. Adjust the sound volume using the volume control buttons ( , ). • To temporarily stop playback, press the button. Press the button again to restart playback. • Even if you stop playback midway and immediately start recording again, the new image will be recorded after the last scene on disc or card (the previous images will not be overwritten). • This DVD Palmcorder can play back image data recorded on other digital cameras conforming to the DCF (Design rule for Camera File system) standard. The range of image data normally playable on this DVD Palmcorder is that with pixels from 80 horizontal x 60 vertical to 4000 horizontal x 3000 vertical. If the pixel data exceeds this range, blue thumbnails will appear (see Fig. 1) indicating the image is unplayable. Playback may also be impossible even if the pixel data is within this range. Al l scenes 1/ 6 PLAY * Fig. 1 • When playing back a still with a large number of pixels on card, "Playback." will appear, and it will take some time for the still to appear. • Depending on the amount of data to be played back, it may take some time for the playback image to appear. • Do not operate the power switch or remove the card while the ACCESS/PC or CARD ACCESS indicator is lit or blinking: Doing so may damage the card or the data on card. 69