Panasonic WJHD316A WJHD309A User Guide - Page 143

I About the HDD DISK MENU The operations regarding the hard disk can be performed by displaying the "HDD DISK MENU" on monitor 2. The "HDD DISK MENU" will be displayed when the SET button is pressed while displaying the system check complete window. The "HDD DISK MENU" will also be displayed automatically after replacing or removing the hard disk. The following operations can be performed on the "HDD DISK MENU". Setting item FORMAT MIRROR ON MIRROR OFF REMOVE RESTART EXIT Description Formats (initializes) the hard disk. It can also change the setting values for the recording area respectively. Mirroring can also be started on this menu. Recovers the mirrored hard disk. Cancels mirroring. Removes the hard disk drive from the system logically. Restarts this unit. Closes the "HDD DISK MENU". Page 145 150 150 151 - - I Display of the HDD DISK MENU Information of the hard disk drive of the unit or the optional extension unit will be displayed on the "HDD DISK MENU". Digital Disk Recorder HDD DISK MENU WJ-HD300A TOP MENU FORMAT MIRROR ON MIRROR OFF REMOVE LINK RESTART 1 MAIN 160GB EXT1 160GB 2 160GB 160GB 3 160GB EXT2 160GB 160GB 160GB EXT3 160GB 160GB 160GB EXT4 *(160GB) *(ERROR) 160GB EXT5 ADD (160GB) ADD (ERROR) 160GB EXT6 160GB 160GB 160GB EXT7 LOST - - 4 160GB 160GB 160GB 160GB 160GB 160GB - Information of recording areas : [SETUP/ESC] OK : [SET] EXIT Main unit/optional extension unit Information about hard disk located in the main unit and optional extension unit 160GB: Indicates the hard disk capacity (disk existed when last started up) 160GB M: Indicates the hard disk capacity (mirrored disk existed when last started up) ADD (160GB): Indicates that this hard disk is newly mounted at this startup, but that it was not mounted last time. Those parenthesized numbers indicate the capacity of the hard disk. ADD (ERROR): Indicates that this hard disk is newly mounted at this startup, but that it was not mounted last time. Then, an error is detected on the hard disk. * (160GB): Indicates that a different hard disk from the one that existed at the last startup is mounted. Those parenthesized numbers indicate the capacity of the hard disk. * (ERROR): Indicates that a different hard disk from the one that existed at the last startup is mounted, and an error has been detected on the hard disk. LOST: Indicates that a position where a hard disk was mounted at the last startup has no hard disk. -: Indicates that a hard disk is not mounted this time nor was it at the last startup. ERROR: Indicates that the hard disk has failed to be initialized. Important: • It is impossible to operate the unit when there is a hard disk with indications of * (capacity), * (ERROR), LOST or ERROR. In this case, remove the relevant hard disk. (Refer to page 151.) • Hard disks with ADD (capacity) indication are not initialized yet. First, initialize them. It is impossible to record images on it or to use it as a copy destination without initialization. Note: The displayed available disk space on this menu will not include the space required for data management. Therefore, the understated available disk space will be displayed. It is possible to display information about the recording area (allocated disk size for normal recording area, event recording area and copy area) by pressing the SETUP/ESC button while displaying the "TOP MENU" of the "HDD DISK MENU". 143