Panasonic WJHD316A WJHD309A User Guide - Page 173

Problem Cannot start recording. Cannot record or display the SETUP MENU of a matrix switcher. Cannot playback images. Cannot control cameras. Check item/Remedy • Check if the HDD has any available disk space. • Check if the recording setup is set to ON. • Check the schedule settings. • Check the recording priority settings. Page Refer to p. 136. Refer to p. 111. Refer to p. 119. Refer to p. 112. • When the setting menu of a matrix switcher is displayed by a non-interlace signal, the setting menu may be unable to function normally. Since the setting menu of the matrix switcher is displayed - by a non-interlace signal, recording or displaying the setup menu of a matrix switcher with this unit may be impossible. • Check if images have been recorded on the HDD. Refer to p. 28. • Can the users record images? Check the level settings of the users logging in. Refer to p. 107 and 110. • Can the users display camera images on the monitors? Check the level settings of the users logging in. Refer to p. 107 and 110. • Check the connection of the camera you are going to control. Coaxial communication control is available for cameras connected to VIDEO IN 1 to 8 for the WJ-HD316A (1 to 6 for the WJ-HD309A). Refer to p. 73. • Check if the camera you are going to control is a combina- tion camera. Refer to p. 73. • Check the camera control settings. Refer to p. 130. • Can the users control the cameras? Check the level settings of the users logging in. Refer to p. 107 and 110. • Check the BUSY indicator. When the indicator is lighting, a higher-priority user is controlling the cameras. You cannot control the cameras until the indicator goes out. Refer to p. 10. 173