Pentax ZX-5 ZX-5 Manual - Page 30
Pentax ZX-5 Manual
View all Pentax ZX-5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
I BASIC OPERATION (PREPARATION) 3 O ,C3 - r1 3. Open the back cover and remove the film. • A roll of 24-exposure film takes about 13 seconds to rewind. • Before opening the back cover, check that [ O is blinking. • When the camera is not in use, set the drive mode switch to the [ L position. • The shutter may be released a frame or more after the specified number of frames have been used as indicated by the number of frames on the film cartridge. However, those extra frames may be lost in the processing. When you take important pictures, rewind the film when the film reaches the number of frames indicated on the film cartridge. * Rewinding a Roll of Film in Mid-Roll If you wish to unload the film before exposing all the frames, use this function. • Set the drive mode switch to a position other than the [ L position, and then depress the mid-roll rewind button by using the protruding part of the strap clamp. • Before opening the back cover, check that L is blinking.