Pentax ZX-5 ZX-5 Manual - Page 61
Snoiivei3do, M0nvagv
View all Pentax ZX-5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
3 70 50 35 28 r - - 1- r "0001 0 22161185.64 SNOIIVEI3dO M0NVAGV 3. Set the desired f-stop • When an F or FA lens is used, an approximate aper- ture indication will appear in the viewfinder when the shutter release button is depressed halfway. When lenses other than an F or FA series are used, no approximate aperture indication will appear in the view- finder. • When lenses other than an FA and F series are used, use either the center-weighted metering or the spot metering. The multi-segment metering mode cannot be used. • When the Pentax A5Omm f/1.2 lens is in use with the lens aperture ring set at a position other than the [ A ] position, the center-weighted metering mode will be set instead of the multi-metering mode. As the exposure will come out aprox.1 stop overexposed, set the lens aperture ring to [ A ] or adjust the exposure deliberately approx. 1 stop under. * Exposure Warning If the subject is too bright or too dark, the selected shutter speed will blink in the viewfinder and on the LCD panel as a warning as shown. When the subject is too bright, choose a smaller aperture, if available; when it is too dark, choose a large aperture, if available. When the shutter speed indication stops blinking, you can take the picture. If both shutter and aperture blink, it means that the exposure is out of metering range, unable to obtain a correct exposure even if the aperture is adjusted. Select a darker subject if it is too bright, or use a flash if it is too dark.