Pentax ZX-5 ZX-5 Manual - Page 40
indicating
View all Pentax ZX-5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
.36 (6) TAKING A PICTURE (9N1100HS) NC/ID/113d° OISV9 II 1 2 90 FL: • Set the focus mode switch to IAF]. 1 . Focus on the subject with the 3-point AF frame )] indicating in red in the photograph. When the shutter release button is depressed halfway down, the lens automatically focuses. 2. When the subject is in focus, the focus indicator 0 lights up and an audible PCV beeping signal is emitted. • As this camera incorporates 3-point autofocus system, the subject will be focused properly even if the subject is slightly off the center of the AF frame. • Select the Spot AF Mode to focus on a particular spot in the frame. See page 65. • When the shutter release button is depressed halfway down, the shutter speed and aperture setting are displayed in the viewfinder. • When j blinks in the viewfinder and on the LCD panel, the use of the built-in flash is recommended. For more details on the built-in flash, see page 38. • The audible PCV signal can be turned off. See details on page 70. • During autofocus operation, the focusing ring should not be obstructed with your fingers, hands, or any other objects. The focus indicator j 0] blinks when the camera is not able to obtain proper focus for one of the following reasons. 1. The subject is too close. Adjust the camera-tosubject distance. 2. The subject is difficult to autofocus. See "HARD-TOAUTOFOCUS" on page 50.