Pentax ZX-5 ZX-5 Manual - Page 97
Pentax ZX-5 Manual
View all Pentax ZX-5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
93 Self-timer : Electronically-controlled type with delay time of 12 sec. Start by depressing of shutter release button, Operation confirmation: By audible PCV signals. Cancelable after operation Mirror : Instant-return mirror with AF secondary mirror Film Loading: Film advances automatically to 1st frame after back cover is closed, Film information window is provided Film Wind & Rewind: Auto wind/rewind by built-in motor, Consecutive or Single advance mode, Approx.2.0 frames/sec.(consecutive mode), Auto rewinding starts at end of roll, Film rewind/completion of rewinding is displayed on the LCD panel, mid-roll rewind button will rewind film in mid-roll Exposure Meter: TTL multi(6)-segment metering, Metering range from EV0 to EV21 at ISO100 with 50mm f/1.4 lens, Center-weighted and Spot metering mode can be set Exposure Compensation:+/- 3EV in 0.5EV step increments Flash : Series-control, Retractable TTL Auto Flash (RTF), Guide number:11 (ISO100/m), Illumination angle cov- ers 28mm lens angle of view, Flash-sync-speed in the range from 1/100 to a slower speed, Day-light-sync flash, Slow-speed-sync flash, Contrast-control-synch flash (ISO range= 25-400), Automatic flash function, Red-eye reduction flash O Flash sync : Hot shoe with X-contact with coupled with Pentax dedicated auto flashes, ISO range=25-800 r71 Power Source: Two 3V lithium battery (CR2 or equivalent) Battery Exhaustion Warning: Battery exhaustion symbol (c=s] is lit (blinking when the shutter is locked; no indication on the right-hand edge of the viewfinder.) Dimension and Weight: 135.0mm(W)x90.0mm(H)x61.5mm(D) (5.3"x3.5"x2.4") 400g(14.1 oz) body only without batteries Supplied Accessories: Hot Shoe Cover F., Release Socket Cap F, Camera Strap F., Eye Cup F., Finder Cap Back cover : Interchangeable for replacing with Data Back F. SPECIFICATIONS ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTIFICATION OR ANY OBLIGATION ON THE PART OF THE MANUFACTURER.