Pfaff admire air 5000 Manual - Page 24

Using the Needle Threader

Page 24 highlights

Using the Needle Threader A Turn off the main power switch and unplug the machine. Raise the needles by turning the handwheel slowly toward you until the mark on the wheel matches the mark on the cover (A). Lower the presser foot lifter (B). B Set the needle threader switch to "R" when threading the right needle. Set the needle threader switch to "L" when threading the left needle. L R Pull down the needle threader lever (A) as far as it will go. Draw the thread along the guide (B) on the needle threader switch from the left and under the hook (C). Make sure that the thread or your finger does not touch the upper looper or the upper cutter. A B C Slowly raise the threader lever (D) so that a loop of the thread is pulled through the needle (E). Pull the thread loop out behind the needle. D E 24 - GETTING READY TO SEW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

A
B
L
R
A
E
C
D
B
24 – GETTING READY TO SEW
Using the Needle Threader
Raise the needles by turning the handwheel slowly to-
ward you until the mark on the wheel matches the mark
on the cover (A).
Lower the presser foot lifter (B).
Set the needle threader switch to “R” when threading the
right needle.
Set the needle threader switch to “L” when threading the
left needle.
Pull down the needle threader lever (A) as far as it will
go.
Draw the thread along the guide (B) on the needle thread-
er switch from the left and under the hook (C).
Make sure that the thread or your finger does not touch
the upper looper or the upper cutter.
Slowly raise the threader lever (D) so that a loop of the
thread is pulled through the needle (E).
Pull the thread loop out behind the needle.
Turn off the main power switch and unplug the machine.