Pfaff admire air 5000 Manual - Page 33

Securing the Thread Chain A B Tie a Knot (A) To avoid the thread chain from ravelling, separate and tie the thread ends together. Use a Sewing Needle (B) 1. Thread the chain into a large eyed, hand sewing needle. 2. Insert the needle into the end of the seam and pull the chain into the seam to secure the threads. Use the Machine at the Start of a Seam (C) C 1. Before placing the fabric in the machine, sew a thread chain approximately 2″-3″ (5-8cm) long. 2. Place your fabric in front of the presser foot. Sew a few stitches and stop. 3. Raise the presser foot and bring the thread chain to the left around and under the presser foot. 4. Place the thread chain between the presser foot and upper knife, holding it in position as you lower the presser foot to sew. 5. After sewing approximately 1˝ (2.5 cm), move the chain to the right and under the upper knife, cutting the chain as you sew. Use the Machine at the End of a Seam (D) D 1. Serge one stitch off the end of the seam. 2. Raise the needle and presser foot, and gently pull the threads off the stitch finger. 3. Turn the fabric over so that the under side is up. 4. Serge approximately 1˝ (2.5cm) over the stitching and angle off the fabric. Cutting the Seams Open Cut the upper looper thread with a seam ripper (not included with the machine) to cut the seams. SEWING - 33