Pfaff ambition 620 Manual - Page 23

Winding Through the Needle, Inserting the Bobbin

Get Pfaff ambition 620 PDF manuals and user guides View all Pfaff ambition 620 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

Preparations Winding Through the Needle Make sure that the presser foot is raised and the needle is in its highest position. Bring the thread up from the needle, under the presser foot, upward through the lefthand threading slot and through the bobbin thread guide (A). Then follow step 3 to 6. Note: Use a metal presser foot when bobbin winding from the needle. Inserting the Bobbin Make sure that the needle is fully raised and the machine is turned off before inserting or removing the bobbin. 1. Open the bobbin cover by pushing the release button to the right (A). Remove the cover (B). 2. Insert the bobbin in the bobbin case with the thread running in a counterclockwise direction. 3. With a finger held gently on top of the bobbin, pull the thread into notch (C). Then pull the thread at arrow markings into the needle plate thread guide from (C) to (D). Pull the thread at the arrow markings into the needle plate thread guide from (D) to (E). To cut off excess thread, pull thread to the right over the blade (E). 4. Replace the bobbin cover. 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
Preparations
Winding Through the Needle
Make sure that the presser foot is raised and the needle
is in its highest position. Bring the thread up from the
needle, under the presser foot, upward through the left-
hand threading slot and through the bobbin thread
guide (A). Then follow step 3 to 6.
Note: Use a metal presser foot when bobbin winding from the
needle.
Inserting the Bobbin
Make sure that the needle is fully raised and the
machine is turned off before inserting or removing the
bobbin.
1.
Open the bobbin cover by pushing the release button
to the right (A). Remove the cover (B).
2.
Insert the bobbin in the bobbin case with the thread
running in a counterclockwise direction.
3.
With a finger held gently on top of the bobbin, pull
the thread into notch (C). Then pull the thread at
arrow markings into the needle plate thread guide
from (C) to (D). Pull the thread at the arrow
markings into the needle plate thread guide from (D)
to (E). To cut off excess thread, pull thread to the
right over the blade (E).
4.
Replace the bobbin cover.
23