Pfaff ambition 620 Manual - Page 56
Handlook Quilting, Free-Motion, upper screw of presser foot holder and insert edge
View all Pfaff ambition 620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Handlook Quilting A quilt usually consists of three layers, two layers of fabric with a layer of batting sandwiched between. 1. Baste the completed quilt top to the batting and backing. 620 35 36 37 38 2. Thread the needle with an invisible (monofilament) 630 46 48 49 50 thread. Use needle size 90 and lightweight, soft cotton (60 wt or lighter) thread in the bobbin. Recommended stitches for a handlook quilt 3. Select a quilt stitch and snap on the recommended foot shown in the sewing recommendations view. 4. Engage the IDT™ system. 5. When you sew the stitch you should only see your bobbin thread. You might need to adjust the thread tension depending on which fabric, thread and batting that is used. Make a few tests on a scrap piece of the fabric you are going to sew and check the tension. Use the edge guide to sew successive rows. Loosen the upper screw of presser foot holder and insert edge guide into the hole. Set the space as you desire and tighten the screw. Free-Motion For free-motion sewing lower the feed dogs on the back of the free arm. Attach the optional Open Toe FreeMotion foot. Move the fabric manually. Maintain a consistent speed and move the fabric in a smooth motion. You are creating the length of the stitch as you move the fabric. Note: When the feed dogs are dropped, the fabric is no longer fed by the machine. You must move the fabric. Sewing 56