Pfaff ambition 620 Manual - Page 30

Operating your ambition™ 620 Settings Menu In the settings menu, you can adjust the machine settings, sound settings and screen settings. Select the Settings Menu tab by pressing the left or right wheel buttons until settings is selected. Select the setting you wish to adjust by pressing the up or down wheel arrows until it is selected. Use the left or right arrows to make your adjustments. Activate by pressing OK. A solid box means a function is activated, an empty box means it is not activated. Note: If a setting cannot be combined with a previously selected setting, the outlines of that box will be dashed. To close the settings menu, press the down button on the wheel until you reach the end of the settings menu and the settings menu tab is highlighted. Thread Tension Your sewing machine will electronically pre-set a thread tension for the selected stitch. Depending on the fabric, batting, thread etc, the tension may need to be adjusted. Select the settings menu to adjust the thread tension. The changes only affect the selected stitch. The setting will go back to default when you select another stitch. In sewing mode, press the info button to see the current selected thread tension. Twin Needle Activate the twin needle program and use the left and right arrow buttons on the wheel to set the twin needle width. When a twin needle size is selected, the width of all stitches is limited for that needle size to prevent needle breakage. In sewing mode, press the info button. The twin needle recommendation icon will be shown. The setting is kept until you deactivate it. Note: Twin needle and stitch width safety cannot be used at the same time. Note: A warning pop-up will be shown if you select a stitch that is too wide for the set twin needle size. 30