Pfaff ambition 620 Manual - Page 26

Changing the Needle, Lowering Feed Dogs, Presser Foot Pressure, Presser Foot Lift

Get Pfaff ambition 620 PDF manuals and user guides View all Pfaff ambition 620 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

Preparations Changing the Needle 1. Use the hole in the multi-purpose tool to hold the needle. 2. Loosen the needle screw. Use the screw driver if necessary. 3. Remove the needle. 4. Insert the new needle, using the multi-purpose tool. Push the new needle upwards with the flat side away from you until it will go no further. 5. Tighten the needle screw as tight as it will go. Lowering Feed Dogs You can lower the feed dogs by moving the switch at the back of the free arm to the left. Move the switch to the right if you wish to raise the feed dogs. Presser Foot Pressure The presser foot pressure has been pre-set to the standard value "N". In most cases, you do not need to adjust the presser foot pressure. For specialty techniques, or when sewing on very light or heavy fabric, adjusting the pressure can improve the result. For very light fabrics, turn the dial to a lower number. For heavy fabric, turn the dial to a higher number. Presser Foot Lift The presser foot is lowered or raised with the presser foot lift (A). If you are sewing on heavy fabric or several layers of fabric, the presser foot can be raised higher (B) to make it easier to place the fabric underneath the presser foot. Note: The machine will not start when the presser foot is raised (except for bobbin winding). 26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
Preparations
Changing the Needle
1.
Use the hole in the multi-purpose tool to hold the
needle.
2.
Loosen the needle screw. Use the screw driver if
necessary.
3.
Remove the needle.
4.
Insert the new needle, using the multi-purpose tool.
Push the new needle upwards with the flat side
away from you until it will go no further.
5.
Tighten the needle screw as tight as it will go.
Lowering Feed Dogs
You can lower the feed dogs by moving the switch at
the back of the free arm to the left. Move the switch to
the right if you wish to raise the feed dogs.
Presser Foot Pressure
The presser foot pressure has been pre-set to the
standard value ”N”. In most cases, you do not need to
adjust the presser foot pressure. For specialty techniques,
or when sewing on very light or heavy fabric, adjusting
the pressure can improve the result. For very light
fabrics, turn the dial to a lower number. For heavy fabric,
turn the dial to a higher number.
Presser Foot Lift
The presser foot is lowered or raised with the presser
foot lift (A). If you are sewing on heavy fabric or several
layers of fabric, the presser foot can be raised higher (B)
to make it easier to place the fabric underneath the
presser foot.
Note: The machine will not start when the presser foot is
raised (except for bobbin winding).
26