Pfaff quilt ambition 630 Manual - Page 34

Stitch Adjustments Your machine will automatically select optimal settings for each stitch. You can make adjustments to every stitch as desired. Adjusted settings only affect the selected stitch and will be reset to default when another stitch is selected. Adjusted settings are not automatically saved when the machine is turned off. The values for stitch length and stitch width are shown to the right of the graphic display. Use the buttons next to the numbers to make adjustments. When a setting is changed the numbers will be highlighted. When trying to exceed minimum or maximum settings for width and length, a warning sound will be heard. 1. Thread tension 2. Stitch length/ stitch density/elongation Stitch Width/Stitch Positioning Increase or decrease the stitch width using + and buttons. For straight stitches, use + and - to move the stitch position left or right. When a straight stitch is selected, the icon changes to show that stitch positioning is active instead of stitch width. Stitch Length/Stitch Density Increase or decrease the stitch length using + and buttons. For satin stitches, use the + and - buttons to increase or decrease the stitch density. This is often necessary when specialty threads are used or when a less dense satin stitch is desired. The stitch density does not affect the actual length of the entire stitch. When a satin stitch is selected, the icon (2) changes to show that stitch density is active instead of stitch length. 3. Stitch width/ stitch positioning Operating your ambition™ 620 34