Pfaff quilt ambition 630 Manual - Page 61
Replacing the Needle Plate, Troubleshooting, General Problems, The Machine Skips Stitches
View all Pfaff quilt ambition 630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Replacing the Needle Plate With the feed dogs lowered, replace the needle plate and insert and tighten the two needle plate screws. Replace the bobbin cover. Maintenance Troubleshooting In this troubleshooting guide you will find solutions to the problems you may have with your machine. For further information please contact your local authorized PFAFF® dealer who will be happy to help you. General Problems Thread snips do not cut the thread? Fabric does not move? Wrong stitch, irregular or narrow stitch? The needle breaks? The machine will not sew? The sewing machine function buttons do not respond to touch? Remove needle plate and clean lint from bobbin area. Make sure that the feed dogs are not lowered. Deactivate twin needle or stitch width safety in the settings menu. Insert needle correctly as described, see page 26. Attach correct needle for the fabric. Check that all plugs are securely plugged into the machine and into the wall socket. Check that the foot control cord is securely plugged into the front socket on the bottom right side of the machine. Push bobbin winder lever to sewing position. The sockets and function buttons on the machine can be sensitive to static electricity. If the buttons do not respond to touch, turn the machine OFF and then ON again. If the problem persists, contact your local authorized PFAFF® dealer. The Machine Skips Stitches Did you insert the needle properly? Did you insert a wrong needle? Is the needle bent or blunt? Did you thread the machine properly? Is the correct presser foot used? Is the needle too small for the thread? Insert needle correctly as described, see page 26. Use needle system 130/705 H. Insert a new needle. Check how the machine is threaded. Attach correct presser foot. Make sure the needle is correct for the thread and fabric. Needle Thread Breaks Did you insert the needle properly? Did you insert a wrong needle? Insert needle correctly as described, see page 26. Use needle system 130/705 H. 61