Philips DVDR3390 User manual - Page 60
Troubleshooting
UPC - 609585111707
View all Philips DVDR3390 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
English Troubleshooting WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help. Problem Solution No power. - Press STANDBY-ON button on the front of the DVD recorder to switch on the system. - Make sure the AC outlet has power. Remote control does not work. - Aim the remote control directly at the sensor on the front of the DVD recorder (not towards TV.) - Remove any obstacles between DVD recorder and the remote control. Aim the remote control towards the set at different angles and/or distances. - Batteries are weak, replace the batteries. - Press REC SOURCE on the remote control to select an input source. Disc does not play. - Insert the disc with the label facing up. - Wrong region code. The DVD must be coded for ALL regions or Region 1 in order to be played back on this DVD recorder. - There is no recording on the disc or it is a wrong type of disc. Read chapter "Playback Playable discs" for details. - Make sure the disc is not scratched or warped. Clean the disc or replace a new one. - Check if the disc is defective by trying another disc. Disc cannot be edited. - The recordings were made on another DVD recorder and hence cannot be edited. No sound. - Check the audio connections, the red and white jacks. Read chapters "Step 1 : Basic Connections - Connecting the audio cables" for details. - Set the Digital output correctly, based on the equipment you connected to the recorder. Read chapter "DVD System Menu Options PLAYBACK settings - Digital Audio Output" for details. 60