Philips DVDR3576H User manual - Page 30
Setting The Clock
UPC - 609585155206
View all Philips DVDR3576H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
SETTING THE CLOCK Set the clock before you try the timer programming. If a PBS (public broadcasting station) is available in your area, follow "Auto Clock Setting" below. If not, follow "Manual Clock Setting" on page 31. Auto Clock Setting This unit can set the time and date automatically by referring to a PBS station. Make sure • The antenna/cable TV connections are correct. • Channels are set. (Refer to page 27.) • If this unit is connected to a cable/satellite box, select the local PBS station on them to set the clock automatically. 1 Press [SETUP] and use [K / L] to select "General Setting", then press [OK]. "General Setting" menu will appear. 2 Use [K / L] to select "Clock", then press [OK]. "Clock" menu will appear. 3 Use [K / L] to select "Auto Clock Setting", then press [OK]. 4 Use [K / L] to select "Auto", then press [OK]. Auto Clock Setting OFF Auto Manual 5 Press [SETUP] to exit. 6 Press [STANDBY-ON y] to turn off the unit. This unit will search for the time only when the power is off. Leave it off for several minutes to give this unit time to set the clock. HDD & DVD RECORDER Note • The clock may set itself automatically after you connect the antenna/cable signal and plug in the power cord. • Only the analog PBS channel signal is effective for auto clock setting. • The unit receives the clock data at 12:00 a.m. / p.m. from the PBS channel when the power is off. 30 EN If the unit chooses an incorrect PBS channel, set the PBS channel manually by following the steps below. 1 Select "Manual" at step 4, then press [OK]. 2 Use [the Number buttons] or [K / L] to enter your PBS channel number, then press [OK]. Set Channel No. CH 1 3 Press [SETUP] and turn off the unit. E2H42UD_DVDR3576H-37_EN.indd 30 2007/12/28 11:14:59