Philips TSU2000 User manual - Page 25
Learning Direct-access and Left/Right Buttons
View all Philips TSU2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
6 Press and hold the button the Remote Control has to learn as device action on your deviceÕs original remote control. The command for the device action is assigned to the Device button in the Home menu and in the Device menu. If the Remote Control has learned the command successfully, OK flashes on the display. You can let go of the button youÕre holding. If the Remote Control has not learned the command successfully, you hear a short buzz and FAIL appears on the Remote Control icon. 7 Program all other device actions you want and return to Use mode via the Mode button. Learning Direct-access and Left/Right Buttons Direct-access and Left/Right buttons can be programmed with a global function or with functions per device. · Buttons with global functions always execute the same command, no matter what device is active. · Buttons with functions per device execute commands depending on the active device. For example, the Left button is the Play command when the VCR is active. Note Per device functions overrule global functions. For example, when you program the Volume buttons globally, but you assign a specific function to them with the tuner, the specific command will be executed when the tuner is the active device. Learning a button per device 1 Switch to the device for which you want to program the button. 2 Complete instructions 2 to 7 in ÒLearning control panel buttonsÓ on page 22. Instead of tapping a button on the touch screen, press the direct-access button or Left/Right button you want to program. The label of the button you have pressed (e.g. chan+ or left) starts flashing on the Remote Control icon. Learning a button globally 1 Tap the Home menu button . 2 Complete instructions 2 to 7 in ÒLearning control panel buttonsÓ on page 22. Instead of tapping a button on the touch screen, press the direct-access button or Left/Right button you want to program. The label of the button you have pressed (e.g. chan+ or left) starts flashing on the Remote Control icon. Getting the Maximum out of it 23