Pioneer AVH-P5200BT Owner's Manual - Page 14
Ejecting a disc, Basic Operations
UPC - 012562975900
View all Pioneer AVH-P5200BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Section 04 Basic Operations - Removing or attaching the front panel will automatically close or open the LCD panel. (Refer to page 64.) ! When the ignition switch is turned OFF after the LCD panel has been closed, turning the ignition switch ON again (or turning it to ACC) will not open the LCD panel. In this case, press OPEN/CLOSE to open the LCD panel. ! When closing the LCD panel, check to make sure that it has closed completely. If the LCD panel has stopped halfway, leaving it like this could result in damage. 1 Display the system menu. Refer to Introduction of menu operations on page 54. 2 Touch TILT. 3 Touch the TILT keys to adjust the LCD panel to an easily viewable angle. The LCD panel angle continues changing as long as you touch and hold the TILT keys. CAUTION Keep hands and fingers clear of the unit when opening, closing, or adjusting the LCD panel. Be especially cautious of children's hands and fingers. % Press OPEN/CLOSE to open the LCD panel. # To close the LCD panel, press OPEN/CLOSE again. Adjusting the LCD panel angle Important ! If you can hear the LCD panel knocking against your vehicle's console or dashboard, touch the TILT keys to move the LCD panel a little forward. ! When adjusting the LCD panel angle, be sure to touch the TILT keys. Forcibly adjusting the LCD panel by hand may damage it. Laying the panel down. Returning the panel to the upright position. # As the set angle is saved, the LCD panel will automatically be adjusted to the same position the next time the LCD panel is opened. Turning the LCD panel horizontally When the LCD panel is upright and hinders the operation of the air conditioner, the panel can be turned horizontally temporarily. % Press and hold OPEN/CLOSE to turn the LCD panel horizontally. # To return to the original position, press and hold OPEN/CLOSE again. # The LCD panel returns to the original position automatically, indicated with a beeping sound 10 seconds after operation. Ejecting a disc 1 Press h (eject). 2 Eject a disc 14 En