Pioneer DEH-X9500BHS Owner's Manual - Page 4

Section 02 Using this unit Using this unit Head unit 1234 Remote control 5 Remote controller buttons marked with the same numbers as on the unit work in the same way as the corresponding unit button, regard- less of button name. e b a 98 7 6 c 9 f l g k h 1 i j d Part Part 1 SRC/OFF 8 MIX/DISP OFF 2 LEVER 9 BAND/ (iPod) 3 /DISP a (phone) 4 (list) b MULTI-CONTROL (M.C.) 5 Open button c Disc loading slot AUX input jack 6 (3.5 mm stereo jack) d h (eject) 7 / (up/down) CAUTION ! Use a Pioneer USB cable when connecting a USB storage device. Connecting a USB storage device directly may be dangerous because it may stick out. ! Do not use unauthorized products. Part Operation e VOLUME Press to increase or decrease volume. f MUTE Press to mute. Press again to unmute. Press to perform manual seek tuning, fast forward, reverse g a/b/c/d and track search controls. Also used for controlling functions. Press to end a call, reject an in- h coming call, or reject a call waiting while on another call. i DISP/SCRL Press to select different displays. je Press to pause or resume playback. 4 En Part k l LIST/ ENTER Operation Press to start talking to the caller while using the phone. Press to display the list depending on the source. While in the operating menu, press to control functions. 1 Turn M.C. to change the year. 2 Press M.C. to select day. 3 Turn M.C. to change the day. 4 Press M.C. to select month. 5 Turn M.C. to change the month. 6 Press M.C. to confirm the selection. Clock (setting the clock) Set up menu When you turn the ignition switch to ON after installation, set up menu appears on the display. You can set up the menu options below. 1 After installation of this unit, turn the ignition switch to ON. Set up appears. 2 Turn M.C. to switch to YES. # If you do not use the unit for 30 seconds, the set up menu will not be displayed. # If you prefer not to set up at this time, turn M.C. to switch to NO. If you select NO, you cannot set up in the set up menu. 3 Press M.C. to select. 4 Follow these steps to set the menu. To proceed to the next menu option, you need to confirm your selection. Language select (multi-language) 1 Turn M.C. to adjust hour. 2 Press M.C. to select minute. 3 Turn M.C. to adjust minute. 4 Press M.C. to confirm the selection. Contrast (display contrast setting) 1 Turn M.C. to adjust the contrast level. 0 to 15 is displayed as the level is increased or decreased. 2 Press M.C. to confirm the selection. Quit appears. 5 To finish your settings, turn M.C. to select YES. # If you prefer to change your setting again, turn M.C. to switch to NO. 6 Press M.C. to select. Notes ! You can set up the menu options from the system menu. For details about the settings, refer to System menu on page 18. ! You can cancel set up menu by pressing SRC/OFF. 1 Turn M.C. to select the desired language. English-Français-Español 2 Press M.C. to confirm the selection. Calendar (setting the date) Basic operations Important ! Handle the front panel with care when re- moving or attaching it. ! Avoid subjecting the front panel to excessive shock.