Pioneer DVR-533H-S Owner's Manual - Page 108
Additional information, On-screen displays and recorder displays - hdd error
View all Pioneer DVR-533H-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
14 Additional information On-screen displays and recorder displays The table below shows a list of error messages that you may encounter when using the recorder and an explanation of their meaning. Message • Initializing disc. Please wait a moment. Explanation/Action When you load a blank DVD-RW disc, the recorder automatically initializes it. • Incompatible region number. The disc loaded has an incompatible region number for the recorder and so will not play. • Cannot record any more titles. • No more space for file management data. • Cannot add any more chapter marks. The disc control data limit has been reached, or the maximum number of chapters and/or titles has been reached. Erase titles/ chapters or combine chapters. • This disc cannot be recorded. Undo the finalization. The disc was finalized on a non-Pioneer DVD recorder. Undo the finalization in order to recording/editing. • Cannot play this disc. • This disc cannot be recorded. • Cannot read the CPRM information. • Could not record the information to the disc. • Cannot edit. • Could not initialize disc. • Could not complete finalization successfully. • Could not undo finalization successfully. • Could not successfully unlock the disc. The disc may be dirty or damaged. Take out the disc, clean it and retry. If the error persists, use a new disc. If the error appears even with a new disc, please consult a Pioneer Service Center. • Incompatible or unreadable disc. The disc loaded is a DVD+R/RW, DVD-RAM or some other incompatible disc type. This display may also appear if the disc is dirty or damaged. • Cannot record to a disc that is not CPRM compatible. • Cannot record this content using Video mode recording. The video source is copy-once protected. Use a VR mode DVD-R/ RW disc with CPRM for recording. • This content is copy protected. The video source is copy-protected and cannot be recorded. • Incorrect CPRM information. The recorder could not read the CPRM information. The recorder may be damaged-please consult a Pioneer Service Center. • The audio will conform to the [Dual Mono Recording] setting. When recording from an external input in Video mode (DVD), Video Mode On (HDD), or in LPCM mode, you can only record the left or right channel; not both. • Repairing disc. During recording, the power was cut. This display appears when the power is restored. • Could not repair the disc. The recorder was unable to repair the disc after a power cut. The contents of the recording will be lost. • Overheating has stopped operation. Press DISPLAY to clear this message. The internal temperature of the recorder has exceeded the operating limit. If this message reappears, please contact a Pioneer authorized service center. • There is no DV input or the input signal is unrecordable. • Cannot preview because there is no DV input or the input signal is unrecordable. No signal was detected at the DV IN jack. This may appear if a blank section of DV tape is playing in the connected camcorder. 108 En