Pioneer DVR-533H-S Owner's Manual - Page 25

Getting started 04 Chapter 4 Getting started Switching on and setting up When you switch the recorder on for the first time, you can make several basic settings using the Setup Navigator feature. This takes you through setting the clock, the internal TV tuner and the video output settings. If you're using the recorder for the first time, we strongly recommend you use the Setup Navigator before starting to use the recorder. STANDBY/ON 4 With 'Start' highlighted press ENTER to start using the Setup Navigator. • Highlight Cancel if you want to exit here. Initial Setup Basic Tuner Video Out Audio In Audio Out Language Recording Playback Clock Setting Help Complete this setup before you start using your recorder. Setup Navigator SEntagrltish Cancel Please use the Initial Setup if you want to make more detailed settings. 5 Use the / buttons to select 'Antenna' or 'Cable' depending on how you receive your terrestrial TV channels, then press ENTER. You can also select Do not set if you don't need the recorder to retune all the channels (if you're using the Setup Navigator for a second time, for example). ENTER Initial Setup BBaassiicc Tuner Video Out Audio In Audio Out Language Recording Playback Clock SAetuttiongChannel Setting Help Setup Navigator AEngtelinsnha Cable Do not Set 1 Switch on your TV and set the video input to this recorder. 2 Press the STANDBY/ON button on the remote control or the front panel to switch on. When you switch on for the first time, your TV should display the Setup Navigator screen. (If the Setup Navigator doesn't appear, you can also access it from the Initial Setup menu; see page 92). 3 Use the / buttons to select an OSD language, then press ENTER. Initial Setup BBaassiicc Tuner Video Out Audio In Audio Out Language Recording Playback Clock SLeattningguage Help English Setup Navigator français This will also set the audio, subtitle and DVD menu language preferences. After selecting Antenna or Cable the recorder starts automatic tuning. This takes a couple of minutes to complete. Tuning 7/68 Cancel If EPG data is downloaded, the clock will automatically be set and you can skip to step 7 below.1 6 Select 'Auto' for automatic time setting, then press ENTER. Initial Setup BBaassiicc Tuner Video Out Audio In Audio Out Language Recording Playback Clock SCetloticnkg Setting Help Setup Navigator Auto Manual Note 1.If you want to adjust the clock after EPG data is downloaded, you must reset the unit to its default settings. You can then set the clock manually from the Initial Setup menu. 25 En