Pioneer DVR340 Operating Instructions - Page 110
The Initial Setup menu
![]() |
View all Pioneer DVR340 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
14 The Initial Setup menu Chapter 14 The Initial Setup menu Using the Initial Setup menu The Initial Setup menu is where you can set various recorder options for sound, picture, language and so on. Some settings can only be changed when the recorder is stopped. During playback and recording these settings are grayed out in the Initial Setup menu. Except for the Setup Navigator, menu screens are exited automatically after 20 minutes of inactivity. • Press HOME MENU and select 'Initial Setup'. In the table below, the default option is marked with a •. Setting Basic Options Explanation Clock Setting Auto Set the channel that broadcasts a clock signal and the clock will be set automatically. Manual • If there is no channel that broadcasts a clock signal in your area, you can set the time and date manually. Display Set preferences for time and date display format. The clock must be set in order to use timer recording. Input Line System 525 System Use for NTSC or PAL-60 recording from an external input. 625 System • Use for standard PAL or SECAM recording. See also About the input line system on page 119 for more information on this setting. Power Save On No antenna input signals are passed through to the outputs when the recorder is in standby. Off • When the recorder is in standby, all signals arriving at the antenna inputs are passed along to the outputs. 110 En
![](/manual_guide/products/pioneer-dvr340-operating-instructions-2aeebe3/110.png)