Pioneer DVR340 Operating Instructions - Page 42
HDD Recording Format
![]() |
View all Pioneer DVR340 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
05 Recording In this area you can set: Record to - Select HDD for hard disk recording or DVD for DVD recording. Select HDD for Auto Replace Recording (daily or weekly timer recording only). Recording Mode - Select XP, SP, LP, EP, SLP or SEP, (See Setting the picture quality/ recording time on page 35). If Manual Recording is on, then you can also select the LPCM setting, or MN (press ENTER then use the / buttons to select the level). Auto Replace Rec. - Automatically erases the previous daily or weekly recording when the next one is recorded. Genre - Select a record genre (for HDD recording only). Bilingual Recording - Select which channel of a bilingual broadcast to record (necessary if recording to a Video mode DVD or to the HDD with the HDD Recording Format set to Video Mode On). HDD Recording Format - Select Video Mode On or Video Mode Off depending on whether you need high-speed copying to Video mode DVD capability or not. 5 After entering all the timer recording information, highlight 'Store Program' and press ENTER. The timer recording list screen is displayed again. The timer program you just input appears in the list. The rightmost column shows various timer recording status messages: • OK - Can be recorded. • Time Over - Not enough space on the HDD (the recording won't finish). • Over 12h - Recording time of over 12 hours set (when recording to the HDD the recording will be split into two titles). • Overlap - Two timer programs partially or completely overlap. The one starting earlier will take priority. • Until ... (eg., Until 13/8) - For a regular recording, the last program that could be recorded is shown. • Data Over -Can't record because the disc management area of the disc is full. • Cancel Once - A regular timer program is set to skip. • Can't Rec - Not possible to record. • Title Over - Can't record because there is already the maximum number of titles on the disc (HDD: 999; DVD: 99). • Recording - The program is currently recording. • Standby - The recorder is in timer recording standby. • nothing displayed - Another timer recording or copying is in progress. 6 To exit the timer recording screen, press HOME MENU. Tip • To enter a title name for the timer recording in advance, select Set Title Name and follow the on-screen display. Note • If you set a DVD timer recording but there is no recordable DVD disc loaded, or the disc loaded doesn't have enough free space for the complete recording, Recovery is shown. In this case (unless you load a suitable disc before the recording actually starts), the recorder will use the HDD for recording. (The message Can't Rec will appear if there are already 999 titles on the HDD or if there is not enough free space on the HDD for recording.) 42 En
![](/manual_guide/products/pioneer-dvr340-operating-instructions-2aeebe3/42.png)